Vitek VT-DVR04 - V2.1 Spécifications télécharger pdf (Page 24)

CHRONO Series DVR

2. Connect the +/- cable to the RS-485 slots on the back of the DVR

2-2-4c. Programming a Chrono DVR to operate with a VT-KBD1 Keyboard

1. Press the “MENU/ENTER” key on the front panel of the Chrono DVR

2. Select DEVICE under “Setup Menu” and press ENTER

3. Select RS232 &RS485 under “DEVICE” and press ENTER

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 67 68

Pas de commentaire

Vitek VT-DVR04 - V2.1 Spécifications Page 24