Vitek VT-E4 Manuel d'utilisateur télécharger pdf (Page 37)

SYSTEM : NETWORK

DHCP : When enabled, the DVR will obtain an IP address automatically if connected to a DHCP server

or router.

DDNS : When enabled, the DVR can be accessed through a Dynamic DNS server.

Commonly used if a broadband connection does not have a static IP address.

WEB SERVICE : When enabled, allows remote connections using Internet Explorer or other web browsers.

IP ADDRESS : If DHCP is not being used, the IP address can be manually set.

GATEWAY : If DHCP is not being used, the gateway IP address can be manually set.

SUBNET MASK: If DHCP is not being used, the subnet mask can be manually set.

1ST DNS SERVER : If DHCP is not being used, the first DNS server can be manually set

2ND DNS SERVER : If DHCP is not being used, the second DNS server can be manually set

DDNS SERVER : If DDNS is enabled, the host DDNS server is specified here

NET CLIENT PORT : The port number that the DVR uses to support remote connection from the client

software

WEB SERVER PORT : The port number that the DVR uses to support remote connection from Internet

Explorer or other web browsers

NETWORK SPEED : Specifies the maximum bandwidth that the DVR can use during a remote connection.

Please note: If any network settings are modified, the DVR will need to be restarted for changes to take

effect

Please note: For further information on network settings and remote connections, please refer to page 53

SYSTEM

Click the NETWORK menu and click the

ON/OFF menu.

Then click the button for ON/OFF.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 82 83

Pas de commentaire

Vitek VT-E4 Manuel d'utilisateur Page 37