Vitek VT-E4 Manuel d'utilisateur télécharger pdf (Page 55)

RECORD

ALARM RECORD SETUP

This setup screen allows the operator to configure alarm input activated recording.

PARAMETER : Recording settings for each channel can be defined across a 24 hour period,

in blocks (for example between 09:00 and 18:00) or for each individual hour.

Note that when SCHEDULE MODE is set to WEEKLY, each day of the week can also be

selected.

SCHEDULE : This section determines at what times the DVR will monitor the alarm inputs and activate

recording.

Please refer to Timer / motion setup on page 49 for details on setting up PARAMETER

and SCHEDULE.

Alarm activated recording can be used in conjunction with timer / motion

recording. For example, the DVR could be configured to record

continuously at a low frame rate (set in timer / motion setup) and then

increase to a higher frame rate during an alarm input (set in alarm setup)

Click the ALARM SETUP menu.

The setting is same as record setup.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 82 83

Pas de commentaire

Vitek VT-E4 Manuel d'utilisateur Page 55