Vitek VT-3496 Guide de l'utilisateur télécharger pdf (Page 5)

VT-HDOC Series

 Please avoid updating if the version number of F/W file is lower than the current F/W version.

 The ‘v1.04D in the file name means the F/W version.

1.1.1.2 Preparing new F/W in the USB thumb driver

All the required F/W files should be copied under the ‘dvr’ folder. Refer to the following steps:

Plug the USB thumb drive into a PC.

Make a ‘dvr’ folder on the root directory on the USB thumb drive.

The characters, ‘d’,’v’,’r’, in the folder name have to be in lower case not in capital.

Copy the released F/W zip file into the ‘dvr’ folder in the USB thumb drive.

Extract the zip file under the ‘dvr’ folder. Finally all files should be located under the ‘USB

thumb drive\dvr’. Refer to the below picture.

Do ‘Safe Remove Hardware and Eject Media’ from your Windows.

Note) F/W upgrade must be followed by manufacturer’s direction.

1.1.1.3 Upgrading System from the System Menu

How to update the firmware:

1 2 3 4 5 6 7 8 9 10 ... 95 96

Pas de commentaire

Vitek VT-3496 Guide de l'utilisateur Page 5