Vitek VT-3496 Guide de l'utilisateur télécharger pdf (Page 58)

VT-HDOC Series

Minimum Recommended

Operating System Windows XP Windows 7

CPU Core2Duo @2.53GHz or Equivalent Core i5 @3.3GHz or Higher

Memory 1 GB 2 GB

Video Card Memory 512MB 512MB

HDD Capacity 50MB 2GB

VGA Resolution 1280x1024x16 1920x1080x32

Direct-X DirectX 7.0 DirectX 9.0c

Network Ethernet 10/100B-TX

7.1.1 CONNECT TO WEB SERVER

Enter the IP address of HYBRID-DVR into the ULR bar referring to the below picture.

Enter the IP address of On Cue HYBRID-DVR into the ULR bar referring to the below picture.

LOCAL NETWORK ACCESS: To find the IP address of the DVR, go to the ‘INFO’ section under

the SYSTEM/MANAGEMENT of the DVR’s menu. If you are on the same network as the DVR,

you can use the DVR’s IP address to access it.

REMOTE NETWORK ACCESS: To access the DVR from a remote network, you need to use

the WAN IP address of the network the DVR is connected to. (Sometimes this address is

referred to as the LIVE, PUBLIC, or OUTSIDE IP). In order to view your DVR remotely you

MUST port forward BOTH the DVR PORT and the WEB SERVER PORT. To find the DVR and

Web Server ports, go to the

NETWORK SETUP page.

If you need assistance with port forwarding, please visit our website and review our

tutorial videos:

http://vitekcctv.com/videotutorials.asp. If you need further assistance,

please reference your router’s manual or contact your Network Administrator/IT

Professional. If your router supports the ‘uPNP’ feature, there is no need to manually

configure ‘Port Forwarding’ because the DVR supports the ‘Auto Port Forwarding’ function

using the ‘uPNP’ protocol.

[The initial screen of Web Server]

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 95 96

Pas de commentaire

Vitek VT-3496 Guide de l'utilisateur Page 58