Vitek VT-4021 Manuel d'instructions télécharger pdf (Page 46)

VITEK VT-DVR Series

4. ADVANCED RECORDING

1. ALARM RECORDING

Please make sure that the alarm feature has been activated under the record setup

menu. Also, make sure that the appropriate post recording duration and the alarm

circuit type have been selected from the event setup menu.

Press the record button and the record icon will

appear as shown on the left. The record LED will

start blinking as it is set to the standby mode until

an alarm is triggered. The DVR is not recording

as long as the record LED is blinking.

When an alarm is triggered, the record LED will

turn solid. The alarm alert and the alarm

recording icons will appear on the screen. The

DVR will record for the duration of the post

recording duration.

If the alarm buzzer is set to on, then the alarm

buzzer will sound for the duration of the Record

Duration. Please refer to page 60 for

configuring the Record Duration.

If an e-mail address has been entered in the network setup menu, then an e-mail will be

sent out alerting an alarm recording.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 153 154

Pas de commentaire

Vitek VT-4021 Manuel d'instructions Page 46