Vitek VT-4021 Manuel d'instructions télécharger pdf (Page 80)

VITEK VT-DVR Series

3. CONFIGURING THE DVR WITH A CABLE MODEM

The DVR works in conjunction with widely available cable modems that offer

conventional dynamic IP addresses. The following steps are not mandatory, but they

are highly recommended to properly set up the DVR directly with the Cable modems.

1. The DVR and the modem should be powered off.

2. Connect the network cable from the DVR to the modem.

3. Power on the modem.

4. Power on the DVR.

5. Enter the menu and go into the Network Setup Submenu

6. Select Dynamic: Cable

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 153 154

Pas de commentaire

Vitek VT-4021 Manuel d'instructions Page 80