Vitek VT-4021 Manuel d'instructions télécharger pdf (Page 73)

VITEK VT-DVR Series

V. NETWORK SETUP

The DVR utilizes widely available broadband internet connections such as T1, Cable,

and DSL to allow remote access, monitoring and control of the DVR in a relatively

reliable manner. The internet connections are divided into two main categories: static

service and dynamic service.

The static service consists of an IP address that remains constant for the duration of the

contract of the internet service, whereas the dynamic service consists of an IP address

that frequently changes every time a new connection is made through the provided

modem, or recurrently in a given period of time. Though most internet service

providers offer both solutions, this manual will distinguish the two solutions according to

the commonly available service type to configure the DVR for the networking purposes.

1. CONFIGURING THE DVR WITH STATIC IP ADDRESS

Internet service providers who offer dedicated services such as T1, SDSL (Symmetric

Digital Subscriber Line) or equivalent services usually provide a batch of external

(Public) static IP addresses that remain constant. These IP addresses are often

provided with additional information such as the subnet mask, the gateway, and the

DNS servers. The following is an example of a configuration provided by such

services:

z IP address range: 64.128.92.26 ~ 64.128.92.30

z Subnet Mask: 255.255.255.248

z Gateway: 64.128.92.25

z DNS servers: 20.19.154.97

20.19.154.98

20.19.154.99

To configure the DVR with the provided

information from the ISP, press MENU, then

move the arrow to Network Setup. Press right

directional button to access the Network Settings.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 153 154

Pas de commentaire

Vitek VT-4021 Manuel d'instructions Page 73