Vitek VT-1203 Manuel d'utilisateur télécharger pdf (Page 4)

HINTS FOR IRONING

1. Sort out the articles to be ironed according to the type of fabric.

This will minimize the frequency of temperature adjustment for dif&

ferent garments.

2. Test ironing a small area on the backside or inside the garment if

you are unsure about the type of fabric. Start with a low tempera&

ture and increase gradually.

3. Wait for about three minutes before ironing heat sensitive fabrics.

Temperature adjustment needs certain time to reach the required

level no matter it is higher or lower.

4. Delicate fabrics such as silk, wool, velour, etc. are best ironed with

an ironing cloth to prevent shine marks.

5. You may need a few times of press to activate the spray, burst and

vertically burst function.

HOW TO FILL WATER

1. Disconnect the iron from mains supply

outlet.

2. Move the Steam Control/Self&Cleaning

Knob to position.

3. Fill water through the water inlet hole.

(See figure 2)

4. Fill up to the 'Max' level marked on the

side of water tank.

Note: For best result, it is advisable to use demineralised water or dis&

tilled water.

Do not use chemically descaled water or any other liquids.

FIRST TIME IRONING

1. Remove any protective films or stickers from the sole plate and the

cabinet.

2. Unwind and straighten the power cord.

3. Fill the water tank with demineralised water or distilled water. (See

How To Fill Water)

4. Connect the iron to a suitable mains supply outlet.

FIGURE 2

На ярлыке означает: изделие нельзя гладить!

(например, эластик)

Примечание:

вид ткани

синтетика

ацетатволокно

триацетат

с люрексом

полиамид

(нейлон)

полиэстер

вискоза

шелк

шерсть

хлопок

лен лен

синтетика

акрил

полипропилен

полиэтан

волокно

позиция

терморегулятора

ярлык

шелк

ENGLISH РУССКИЙ

1203.qxd 03.07.03 16:47 Page 8

1 2 3 4 5 6 7 8 9 10

Commentaires sur ces manuels

Pas de commentaire

Vitek VT-1203 Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Fers à repasser Vitek VT-1203